This fast-charge power bank module delivers stable and efficient charging with support for QC18W, PD20W, and Huawei SCP22.5W. Equipped with USB and Type-C ports for both input and output, it ensures wide compatibility across 5V/9V/12V devices. Safety is enhanced with over-voltage, over-current, short-circuit, temperature, and battery protection. Features include a 4-level LED battery indicator, low-current mode for small devices, and built-in reverse-polarity protection.
Note:
1. 18650 batteries are not included—please purchase separately.
2. Only supports flat-top, unprotected 18650 batteries (65mm length).
3. Ensure correct polarity when inserting batteries.
USB1 + USB2 Output: 5V/3A, 9V/2.5A, 12V/1.87A
(When multiple ports output simultaneously, only 5V is supported.)
Micro-USB Input: 5V/3A, 9V/2A
Type-C Output: 5V/3A, 9V/2.22A, 12V/1.67A (PD Output)
Type-C Input: 5V/3A, 9V/2A, 12V/1.5A
Supports 5V pass-through charging (charge & discharge simultaneously)
QC: 18W; PD: 20W; SCP: 22.5W
Note:
If your phone does not support its proprietary fast-charge protocol via USB, you may use PD charging through the Type-C port instead.
Other Functions
Long press the button for 3 seconds to enable low-current mode.
Double-click the button to turn off all outputs.
Fast-Charge Protocol Compatibility
With a data-transfer charging cable, if any of the following protocols are supported, communication and handshake will succeed.
- Supports 5V / 9V / 12V input & output voltage levels
- Compatible with BC1.2, Apple (cable controlled), Samsung fast charging
- Integrated Huawei SCP 22.5W super-fast charging
- Integrated QC2.0 / QC3.0 Qualcomm fast charging
- Integrated FCP (Huawei) & AFC (Samsung) input/output fast charging
- Integrated USB-C DRP protocol (supports input & output fast charging)
- Integrated USB Power Delivery (PD2.0 / PD3.0)
- Supports PD2.0/3.0 input & output
- PPS supported: 3.3V–11V, 20mV/step voltage adjustment
Charging Specifications
- Supports up to 18W charging
- Battery charging current automatically adjusts, up to 5A
Discharge Specifications:
- Output capability: 5V/3A, 9V/2.22A, 12V/1.67A
- Built-in input over-voltage & under-voltage protection
- Integrated output over-current, over-voltage, and short-circuit protection
- Battery over-charge, over-discharge, and over-current protection
- IC over-temperature protection
Other Details:
Operating Voltage: 3.3V–4.15V (spring contact may cause voltage drop)
Battery Level Indicator:
- 4-segment LED indicator
- Based on voltage calculation
- Recommend using batteries with good performance and stable voltage
- Poor batteries may cause excessive voltage drop, resulting in inaccurate battery level and limiting output to level 1 or 2
- Mainboard auto-shuts down when idle
Special Feature
- Mainboard includes reverse-polarity protection
- Installing the battery backwards will not damage the board
- Reinstall correctly to resume normal use
This fast-charge power bank module delivers stable and efficient charging with support for QC18W, PD20W, and Huawei SCP22.5W. Equipped with USB and Type-C ports for both input and output, it ensures wide compatibility across 5V/9V/12V devices. Safety is enhanced with over-voltage, over-current, short-circuit, temperature, and battery protection. Features include a 4-level LED battery indicator, low-current mode for small devices, and built-in reverse-polarity protection.
Note:
1. 18650 batteries are not included—please purchase separately.
2. Only supports flat-top, unprotected 18650 batteries (65mm length).
3. Ensure correct polarity when inserting batteries.
USB1 + USB2 Output: 5V/3A, 9V/2.5A, 12V/1.87A
(When multiple ports output simultaneously, only 5V is supported.)
Micro-USB Input: 5V/3A, 9V/2A
Type-C Output: 5V/3A, 9V/2.22A, 12V/1.67A (PD Output)
Type-C Input: 5V/3A, 9V/2A, 12V/1.5A
Supports 5V pass-through charging (charge & discharge simultaneously)
QC: 18W; PD: 20W; SCP: 22.5W
Note:
If your phone does not support its proprietary fast-charge protocol via USB, you may use PD charging through the Type-C port instead.
Other Functions
Long press the button for 3 seconds to enable low-current mode.
Double-click the button to turn off all outputs.
Fast-Charge Protocol Compatibility
With a data-transfer charging cable, if any of the following protocols are supported, communication and handshake will succeed.
- Supports 5V / 9V / 12V input & output voltage levels
- Compatible with BC1.2, Apple (cable controlled), Samsung fast charging
- Integrated Huawei SCP 22.5W super-fast charging
- Integrated QC2.0 / QC3.0 Qualcomm fast charging
- Integrated FCP (Huawei) & AFC (Samsung) input/output fast charging
- Integrated USB-C DRP protocol (supports input & output fast charging)
- Integrated USB Power Delivery (PD2.0 / PD3.0)
- Supports PD2.0/3.0 input & output
- PPS supported: 3.3V–11V, 20mV/step voltage adjustment
Charging Specifications
- Supports up to 18W charging
- Battery charging current automatically adjusts, up to 5A
Discharge Specifications:
- Output capability: 5V/3A, 9V/2.22A, 12V/1.67A
- Built-in input over-voltage & under-voltage protection
- Integrated output over-current, over-voltage, and short-circuit protection
- Battery over-charge, over-discharge, and over-current protection
- IC over-temperature protection
Other Details:
Operating Voltage: 3.3V–4.15V (spring contact may cause voltage drop)
Battery Level Indicator:
- 4-segment LED indicator
- Based on voltage calculation
- Recommend using batteries with good performance and stable voltage
- Poor batteries may cause excessive voltage drop, resulting in inaccurate battery level and limiting output to level 1 or 2
- Mainboard auto-shuts down when idle
Special Feature
- Mainboard includes reverse-polarity protection
- Installing the battery backwards will not damage the board
- Reinstall correctly to resume normal use
